The jaws are the most important part of your vise. Renzetti vice jaws are made of steel that is heat treated and black oxide. The jaws are flat inside to prevent hook damage without compromising the hook holding power.
Presentation 2000 Cam Jaw - X8066
Hooks # 28 to 4/0
Presentation 3000 Cam Jaw - X8032
Hooks # 28 to 2
Presentation 4000 Cam Jaw - X8045
It has a military anti-corrosion coating to prevent rust and comes with a brass handle
Rotary shaft not included
Hooks #28 to 4/0
Traveler Cam Jaw - X8044
When the Cam Jaws were designed, we keep in mind all the tyers that bought the traveler vise in the 80's when it was introduced.
So regardless if you have T2000, a C2000 or a C2200 you can add the cam jaw to your Traveler Series Vise.
Hook #28 to 4/0
Saltwater Traveler Cam Jaw - X8046
This is a replacement cam jaw for the Saltwater Traveler. This jaw can also be used on a Saltwater Clouser Minnow Arm X8071
Not intended to be used on a Traveler Series Vise
Rotary shaft not included
Hooks #4 to 8/0
Master Cam Jaw - X8025
Replacement Jaw for Master vises with serial #865 and higher. This jaw can also be used on a Master Clouser Minnow Arm
Rotary shaft not included
Hooks #28 to 10/0
Master Cam Jaw and Arm - X8052
Replacement Master Jaw for Master Vises with Serial #0001 to 864. Also used on a Master Clouser Minnow Arm
Sec. Rotary shaft included, material clip not included
