Retail Store has Reopened!
  Thur & Fri, 12:00 - 5:00. Fly Shop employees wanted. Full and part-time available.

RodMounts Interior Rod Carrier - ROD-UP For Trucks - RUPTS

Ships 9/30/2021
RodMounts has designed a rod rack for Trucks. This model works if you have a short bed truck with pass-thru windows in the cab and cap. This model is designed to allow the rod tips to pass through the pass-thru windows into the passenger area. This model can also be used in long bed trucks and allows for long rods (longer than 8’) to be transported strung up.

  • Fits most trucks with pass-thru windows
  • Will transport all types of rods and reels
  • Rods can be positioned above, below or both on the tube assembly
  • Tip holder can be adjusted vertically and horizontal for the best fit
  • No permanent installation required. No drilling into vehicle
  • 6 rod holders included
  • Additional rod holders can be added and are sold separately.
  • Rods can be transported in 2 or more sections if required
  • Rear rod holder assembly features telescopic tubes
  • Max. width = 73” / 185cm
  • Min. width = 51” / 130cm
  • Maximum weight limit – 20 lbs / 9 kgs
  • Installation time: 30-60 minutes
  • Tools required: possibly Philips screwdriver and allen wrench (included)
  • Comes equipped with 2 separate lengths of vertical tip holder upright for best fit

Window Frame Bracket fits between frame and cap

Bracket is held securely with set screw

Tube assembly can be removed easily leaving just the bracket in place if cargo space is required

Rear assembly mounts to window frame with stainless steel bracket

Telescopic tubes lock with secure thumb screws

Rod holders lock onto tubes with thumb screws

Rubber tension bands adjust for securing different diameter rods

Adjustable tension bands secure large and small diameter rod butts

Rod holders can be positioned above and below the tube assembly

Tip holder horizontal assembly clamps to headrest posts. Front or middle seats both work

Tip holder adjusts vertically for easy loading

Tip holders adjust all the way to the ceiling for maximum head room

Tip holders can mount to both headrests for more rod carrying capacity for trucks with full pass thru windows

Included optional short vertical tube for tip holder for backseat headrests

Optional foam holder for large diameter rods with tip holders, sold separately
This short video demonstrates the ease of installation and also the versatility of ROD-UP for Trucks with Pass-Thru>

RUPC Installation Instructions

Other Items That May Interest You