Liquid courage. Let’s face it, die-cast reels are intended to be low-cost alternatives to machined reels, right? Imported. Heavier. Easier to damage. Plain Jane. Well . . . not anymore. When creating Liquid, Lamson focused purely on the virtues and advantages a pressure-cast process can offer. Structurally, you can do things with casting that you can’t machine: Full-radiused compound curves. Near zero-radius inside corners. And for a precision fit and finish, we even go back and machine the cast part in critical areas - amplifying the best aspects of both worlds.
They pushed back on other boundaries as well. How much of a reel at this cost can be made in the US.? Quite a lot, as it turns out. It’s a good mix, too. Liquid’s high-quality castings are imported, but the components critical to the drag system are CNC-machined in the US. Liquid reels are assembled in Boise alongside our highest-priced reels. No other $100 reel can boast this much US content and quality oversight.
Format: Large Arbor
Materials: Pressure Cast Aluminum Frame and Spool
Finish: Polyuerathane Case and Spool
Drag: Sealed Conical Drag
50% US Manufactured, 100% Idaho Built
| MODEL |
DIA |
WIDTH |
WEIGHT |
ROD WT |
LINE |
CAPACITY |
| 3+ |
3.34" |
0.99" |
4.20 oz |
2.3.4 |
WF4 |
100 yds 20# |
| 5+ |
3.61" |
1.00" |
4.65 oz |
4,5,6 |
WF6 |
100 yds 20# |
| 7+ |
3.85" |
1.14" |
5.20 oz |
6,7,8 |
WF8 |
200 yds 20# |
| 9+ |
4.65" |
1.37" |
6.70 oz |
8,9.10 |
WF10 |
250 yds 30# |
